Scott Tilton wrote sometime ago :
> Just for the record, according to my experiences this weekend . . .
> An early TR4 intake manifold meant for H6 carbs, will NOT bolt up to
> an engine that has the later TR4A exhaust manifold.
<snip>
> The problem is that the balance tube that connect the front and rear
> cylinders interferes with the exhast tubes coming off cyls 2 and 3.
<snip>
Scott and List ,
Could there be any benefit from cutting off the balance tube , then filling and
flowing each half of
the intake manifold ?
I'm all ears .
TIA
Mike
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|