>"I don't recommend using it (Eezibleed) with DOT 5 brake
>silicone fluid. DOT 5 is easily aerated,
You bet. That's why I don't recommend silicone brake fluid. Its only real
advantage is that it does not hurt your paint. Other than that, it is not worth
the hassle. Good for parade cars.
>and the 20psi pressure of
>Eezibleed will exacerbate the problem".
Where did your expert get the idea that you need 20 PSI to bleed brakes? 2
PSI is probably adequate. I use about 5. Don't forget to test your setup dry
before you fill the bottle. If you have a leak somewhere, you want to discover
it as an air leak, not a fluid leak.
Phil Ethier
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|