triumphs
[Top] [All Lists]

RE: TR4A Heater Valve

To: triumphs@autox.team.net
Subject: RE: TR4A Heater Valve
From: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Mon, 19 Aug 2002 09:50:31 -0700 o rp.anheuser-busch.com>
> I removed the pipe and tried a 1/2" NPT plug on the
> fitting coming
> out of the water pump housing. It was too big. I'm guessing it is 7/16".
> Hardware stores, auto parts stores & home improvement stores
> don't have this
> size.

The opening in the fitting is not a pipe thread.  However, if you remove the
fitting from the water pump housing, the thread into the housing is.  Cars
without heaters do not have the fitting, just a 3/8" pipe plug in the
housing.

Randall

///  triumphs@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>