Doug,
The few I've seen were right around the 60,000 mark in production. The
stanchions, stanchion plates, and the tenon plates are the same as used on
the chrome windscreen frames. It's the 2-piece Tenax screw/peg/nuts for the
polished cast aluminum windscreen frame I can't seem to locate anywhere.
Apparently the soft aluminum wouldn't hold the typical Tenax studs in the
casting very well. They also tend to scratch easier then the chrome,
especially around the pegs.
Dave Willner
59 TR3A Apple Green
70 BSA 441 Victor Special
----- Original Message -----
From: <Rosspemlee@aol.com>
To: <dwillner@icontech.com>; <wredinger@oppd.com>
Cc: <triumphs@autox.team.net>
Sent: Wednesday, June 26, 2002 10:36 PM
Subject: Re: TR3A Tenax source needed
> I remember seeing some of these (cast aluminum w/s posts) on some of the
last
> TR3A's/B's. My recollection is that they were just very highly polished
not
> chromed. It seems to me there were some mounting differences as well.
Anyone
> else remember that?
> Doug Ross
> Rosebud Racecar
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|