Mark,
This is TR6 info but may help you in your search.
K&N Filter Site - http://www.knfilters.com/- K&N Bolt on Air Filter Kit &
Elements - K&N part# 56-9156 - Element by itself is part# E-9144. Bob
Greene says part# is 56-1620 right off the box. Check with Advance Auto
Parts/Auto Zone http://www.knairfilters.com/56cat.pdf
- K&N Filters in original TR6 air box The big three will point you to
K&N Part #E-2540 but is also said to be too tall for the TR6 air box.
The K&N #E-2540 is 2-3/16 inches high. The Fram for a TR6 canister, part
number CA656 is 2 inches high. The E-2540 is too high and will be
compressed when fitted into a TR6 canister. The closest element to the
stock filter size (based on the Fram filters which seem to fit real well)
is the #E-3360. That one is 2 inches high and fits without compressing
into the canister. If you get the E-2540, make sure the elements are not
getting compressed in the housing as that might affect the air flow.
Good luck,
Jay
> Does anyone know a part number for K&N (or similar) bolt-
> on air filters that will fit a '73 GT6 with Strombergs?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|