--- Mike Rose <lytspeed@hotmail.com> wrote:
> The studs that are used to mount the wire wheel splined extensions are about
> 5/16" shorter than those used to mount the disc wheels. Also, the nut is
> thinner than the nut used for disc wheels. If you don't use shorter studs
> and thinner nuts, the stud and/or nut will contact the inside of the wire
> wheel and not allow it to seat properly on the adaptor. This is not good
> because the wheel will be contacting only at four points (the studs and the
> nuts) instead of the whole circumference of the adaptor. I have seen this on
> a car and it makes four fairly nasty "gouges" on the inside of the wheel hub.
>
>
> Mike Rose
> '59 TR3A
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|