Message text written by David Templeton
>In hooking this heater up to the electric system I need to do the
following
(please correct as needed):
1- run the black line from the spare wire on the temp gauge (green) to the
reostat
2- connect the bullet connectors together between the reostat and the
heater
3- ground the eyelet wire on the heater to the body, somewhere, any
suggestions?
<
In doing some research for Dan Masters pending guide to electrical systems
for TR2-4, that issue is still unresolved (as far as I know) but I think
your scheme is most likely correct. That's the way my car is wired but I
wouldn't hold that up as representative of how the factory did it (ie: this
car is so DPO'd...)
Cheers
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|