I have isolated my voltage drop when the head lights are on (motor running) to
the ground connection. ( volts droping to 12).
I cleaned the factory tab connection on front of car and the ground wire
connection; but voltage still drops.
When I run a jumper wire from headlight ground to the valve cover stud: volt
gage will maintain 13+. which is ok. (but who wants to have a ground wire
going to their valve cover)
I tried jumping it to the ground on the steering rack, but still dropped under
13.
Anyone have any ideas where to get a good ground connection; also need to
ground for ac condenser fan.
If all else fails i guess I'll run it back to the battery ground, but not
pretty.
thanks in advance
al salvatore
76tr6
FYI
saden ac compressor SE 7 with adapter bracker mounted up very good , replacing
old york unit; for those thinking of updating
their a/c unit.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|