Bob:
I have the original metal plate on my '70 TR6 in this position, that
as the following information:
Engine Bay Plate on Left Wheel Well
Vehicle Emission Control Information
The S.T.M.C., LTD.
Triumph TR6
Engine 152 cu. in.
Tappet Clearance (cold) 07010 in.
Engine Idling Speed (hot) 800/850 RPM
Ignition Timing (idling speed) 40A.T.D.C.
Approx. Static Ignition Timing 120B.T.D.C.
Carbon Monoxide Content at Idle 075-275%
Transmission Position Neutral
Not sure if the big "3" carry this plate (sorry, still painting
the room with the catalogs, which are boxed and under cover.
Scott Suhring
Elizabethtown, PA
'70 TR6
'59 TR3
Bob French wrote:
>
> Almost done with my 73TR6 (CF10688U). Couple of little things that I need
> help with tho.
> Atop the drivers side front wheel well, inside the engine compartment, are two
> holes that look like rivets holes for something akin to a commission plate.
> Checked every book and person I can find and no one seems to know what went
> there. Best guess so far is a "decal" for engine smog calibrations, but no
> one is certain...so, on a 73 TR6
> 1. What goes there, and
> 2. Where can I get one?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|