[Charlie, this bounced when I sent it direct]
4/6/2002 8:58:49 PM, Charles Shaw <charlie.shaw@acsalaska.net> wrote:
>Doing a little cleaning and re-assembly today and found the EGR pipe from
>the valve to the manifold is cracked open at the bend for approximately an
>inch. This is on a 75 TR6 and is Moss part number 379-425 for reference.
>Moss list this pipe as NA. Does anyone know of a source or a substitute for
>this pipe. It appears to be aluminum with the brass fittings and olives.
>Would plugging the holes cause any major (or minor) problems. Thanks for
>any help.
Years ago, the replacement "L" shaped pipe for my TR6 came from TRF.
The PO had purchased it (probably late 80's or early 90's). I suspect it does
something important. <g> I'll bet you could have one fabricated pretty
cheaply, which makes me wonder why they're NLA.
Steven Newell
Denver, CO USA
Steven Newell
Denver, CO USA
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|