I have the clutch and brake pedal assembly out of my TR4 and trying to take
it apart for painting. It doesn't want to come apart. Before I can remove the
pedal arms, I have to remove the pivot shaft. But in order to do that, I have
to remove the two support brackets that slide over the top. This is my
problem, they don't want to come off. I tried prying them off with a screw
driver, hammering them off but they won't budge. I don't want to apply too
much force because I am afraid I will damage it. Do they come off and if so,
any suggestions as to how?
Thanks,
Peter Schoppelry
63 TR4
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|