In a message dated 03/31/2002 11:40:44 PM Eastern Standard Time, Popnglo
writes:
> In a message dated 03/31/2002 7:01:30 PM Eastern Standard Time,
> geohahn@ultrasw.com writes:
>
>
> >> To add to Geo's " I don't recall what you drive but on TR3s & 4s
>> clearance is tight, ... clearance there is maybe a bit less than 5".
>
> You may also want to consider one that will extend up at least 24'' or
> more, if you intend to use the rear tube cross member ... need this much to
> get good clearance to put floor jacks forward of the rear tires.
> Ed ('58 TR3A)
Return-path: <Popnglo@aol.com>
From: Popnglo@aol.com
Full-name: Popnglo
Date: Sun, 31 Mar 2002 23:40:44 EST
Subject: Re: Hydraulic Jack Recommendation
To: geohahn@ultrasw.com
In a message dated 03/31/2002 7:01:30 PM Eastern Standard Time,
geohahn@ultrasw.com writes:
> To add to Geo's " I don't recall what you drive but on TR3s & 4s clearance
> is tight, ... clearance there is maybe a bit less than 5".
You may also want to consider one that will extend up at least 24'' or more,
if you intend to use the rear tube cross member ... need this much to get
good clearance to put floor jacks forward of the rear tires.
Ed ('58 TR3A)
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|