Hi
Remove and clean thoroughly. (degrease if necessary) Check inner cable for
wear, broken strands. Allow to dry . Lube with graphite powder. Rub on inner
cable, "squirt" into outer cable.
Don't use grease or oil as these will attract dust an clog up the works
again.
Cheers
Don
In Alberta where the snow is still on the ground, the sun is shining but the
temp is still below 0 Celcius.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|