Could there still be air in the hydraulics? Two possible causes are the
slave was reinstalled upside down (the bleed valve needs to be on top)
or the pedal was worked too gently during bleeding (you really need to
jam it to the floor - push too slowly and the juice will just dribble
around the air bubbles at the highest point in the pipe, rather than
pushing them through the system).
After that are the mechanical issues with the clutch, which I'll leave
to someone else.
stantr6@bellsouth.net wrote:
> Rebuilt slave cyl. with kit from V.B., replaced all fluid, bled system with
>two people, one pushing pedal, other opening/closing bleed valve on slave.
>
> Clutch is still soft, more ineffective now after the rebuild and fluid change.
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|