Except I'm pretty sure all '3s had the 4 1/2" diameter hub. My '59 does and
so did my '61.
Michael Ferguson
1959 TR3A TS53990L...O
There is a very fine line between 'hobby' and 'mental illness.'...Dave Barry
> From: Bill Pugh <anabil@caltel.com>
> Reply-To: Bill Pugh <anabil@caltel.com>
> Date: Sat, 9 Mar 2002 17:33:59 -0800
> To: "Michael Gajic" <michaelgajic@hotmail.com>, triumphs@autox.team.net
> Subject: Re: TR4? Steering Wheel
>
> At 12:25 PM +1100 3/10/02, Michael Gajic wrote:
>> Listers,
>>
>> I picked up a Blumels style black plastic steering wheel at a swap meet
>> yesterday. It looks just like a TR4 steering wheel and I am trying to figure
>> out if it is suitable for my TR4 (the seller didn't know what it came off).
>>
>> I have posted pictures of the wheel at:
>>
>> http://www27.brinkster.com/trfour/steering.htm
>>
>> The wheel is 16 inches in diameter. There is a grooved hole in the centre
>> that is 5/8 inches in diameter. There is a smaller hole above it that is 3/8
>> inches in diameter.
>>
>> The large hole in the middle expands to become 3/4 inches in diameter from
>> the rear of the wheel.
>>
>> So will this steering wheel fit a TR4?? I look forward to your responses.
>
> Hi Michael, well I don't know about TR4, but that wheel looks exactly
> like the one on Casper (1957 TR3).
>
> Good Luck
>
> --
> Bill Pugh
> 1957 TR-3
> aka Casper
> TS16765L
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|