Take a close look at the inner cable. You'll notice
it's actually a spiral of small wire, just like the casing
When rotating, it wants to screw itself down the length
of the outer jacket.
Two things.... 1) there should be a little clip on the inner
cable at one end, designed to keep the inner cable in
position. If it's not there it could be forcing itself into the
tach as it rotates.
2) see which direction the spirals are running and
consider the possibility of reversing the inner cable
end for end to counteract some of the 'spinning screw' effect.
Paul Tegler ptegler@gouldfo.com www.teglerizer.com
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|