You may want to check the condition of your PCV system. The PO of my TR6
had removed the entire PCV system when he installed the weber carbs.
The oil leaks this caused was impressive to say the least.
I rigged up '69 Tr6 Pcv valve and this eliminated all the leaks.
Paul
On Monday, February 18, 2002, at 09:06 AM, Volare340@aol.com wrote:
> Before I crawl up under there, thought I would ask the group for common
> areas
> underneath where oil leaks are encountered (74 TR6). I drive the car
> only
> every 2 - 3 weeks, and when I move it there is a 1/2 quart-sized puddle
> of
> oil on the floor. The only thing I have tightened so far is the oil
> filter,
> which has the spin-on conversion. I appreciate any and all suggestions.
>
> Tom K
> North Atlanta
> 1974 TR6
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|