There is some intersting stuff on Brian Sandborn's webpage at
http://www.net1plus.com/users/sanborn/Back_Together-2.htm
On my side, I am just putting the 1st miles on an Healey 3000 which
engine I rebuilt over the summer. I just made sure that I had plenty
of assembly lube on the cam lobes (before fitting the rocker shaft,
because after it's done it's a bit more problematic to remove the
tappets...), I tried to fill the oil galleries from the cylinder head
using a hole in the head casting that's used normally by a pipe
bringing oil to the rocker shaft. I don't see a similar pipe in the
TR4 head I have on my desk (talk about a paper weight) and I have to
assume that the oil is brought to the rocker shaft through the
pedestals.
The rest is on the above page.
Francois
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|