In a message dated Fri, 18 Jan 2002 12:11:22 AM Eastern Standard Time, Bill
Kelly <bk54@erols.com> writes:
> So then, presumably, would GA41328LCV, built 2 weeks prior (22 Nov). How
> would I know? How wide is the "wide" finisher? Mine's (from memory -
> it's COLD outside!) about 1/4" (5 or so mm). Not my idea of Wide, really...
>
> I know it has the 2-part metal finisher with clips top and bottom, and I
> know this installed easily in a new weatherstrip purchased from a major
> UK vendor in 1997.
The "wide" finishers are probably more like 1/2" wide. Herald 1200s (coupes and
convertibles, anyway) actually used three different finishers: the "wide"
style, a narrower, two-piece metal with additional finisher clips top and
bottom, and the "chromed" plastic one-piece type with the single finisher clip
at the bottom center. The latter two both fit in the same seal and look very
similar from a distance.
--Andy
Andrew Mace, Vice President, Member Services
and 10/Herald/Vitesse (Sports 6) Vehicle Consultant
The Vintage Triumph Register <www.vtr.org>
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|