Message text written by "Williams, Bill (Atlanta)"
>I have a buddy who has pulled his 76 TR6 engine and is doing a rebuild.
He has had 80 thousandths shaved from the cylinder head and is trying to
find a source for 80 thousandths shims to go under the rocker pedestal.
Anyone have good source?
Thanks,
Bill
Atlanta
<
Bill, if he prefers he can get shortened pushrods from BPNW. But the
alternative is shims. I made shims (for the TR3) out of aluminum flashing
available from the local hardware store. Get a good pair of tin snips and
don't forget the oil feed hole in the rear pedistal.
Cheers
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|