Hi Karl
In actual fact, the BSF and BSW standards differ, the 1/2" wrench will fit
the heads of the 1/2" BSW and 7/16 BSF, if my memory is correct, ( I think
it is always one size smaller for the BSF than the BSW) any how you will
usually find the 2 sizes each wrench will fit are marked on them where AF
sizes will have just one!
Graham.
----- Original Message -----
From: "Karl Vacek" <KVacek@Ameritech.net>
To: "TR Listserv" <triumphs@autox.team.net>
Sent: Sunday, October 28, 2001 2:41 PM
Subject: Re: Whitworth
| Whitworth wrench sizes correspond to the nominal diameter of the
fastener -
| ie, a 1/2" wrench fits the head of a standard BSF or BSW screw or bolt.
Of
| course if the head is NOT standard, then...
|
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.291 / Virus Database: 156 - Release Date: 25/10/01
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|