>Hope you have good fortune to find someone with a bore-gauge. If not:
>
>a) there is one up on e-bay (Item # 1654424015 -nfi)
>b) find an inexpensive inside mic set
>c) get yerself a set of snap guages and a 2-3" mic (my solution - cost ~$25
>on ebay)
"T" gauges and inside micrometers measure only two points, or a simple
diameter. If you have three-lobe or five-lobe out-of-roundness, you can miss
it using these tools.
Phil Ethier Saint Paul Minnesota USA
1970 Lotus Europa, 1992 Saturn SL2, 1986 Suburban, 1962 Triumph TR4 CT2846L
LOON, MAC pethier@isd.net http://www.mnautox.com/
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|