----- Original Message -----
From: "mcgibney" <mcgibney@attcanada.ca>
To: <triumphs@autox.team.net>
Sent: Wednesday, October 10, 2001 9:04 PM
Subject: Re: TR250 Cam Bearing Followup
hi David
You need two part # 142647 and three part # 142648.
good luck
Scott
----- Original Message -----
From: "David" <dmb993@earthlink.net>
To: "TR250" <triumphs@autox.team.net>
Sent: Wednesday, October 10, 2001 3:03 PM
Subject: TR250 Cam Bearing Followup
> Folks,
>
> As many of you know, I'm having my TR250 block bored
> to accommodate cam bearings. My machinist needs to know
> either the over-bore size required to fit the bearings or the
> application for which the bearings were originally intended.
> I seem to recall Ken Gillanders saying that these bearings
> were originally applied to the spitfire motor (1500cc?) but
> am not sure. Listquest is down and Ken is not available. Thanks
> in advance for any help provided.
>
> David Brady
> 68 TR250
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|