James, Skip, Randall, Greg, Jim, Shane and anybody else that I might have
missed,
Thanks for the info. I am looking at the Blue TRF Spare Parts Catalog.
While they don't illustrate the seal it does seem to be called out in the
descriptions under "Fuel Filler Cap" as "Seal, non-vented". My friend
has a '72 TR6 so it must be the 725220 number.
Thanks again,
Jay Welch, Abington MA
1971 TR6 project
1973 TR6 driver - wanting to "Drive it Hard"
Member "Cape Cod British Car Club" @
http://clubs.hemmings.com/capecodbritish/
First annual Columbus Day Weekend Event Saturday 10/6 thru Monday 10/8.
See website for details.
On Wed, 3 Oct 2001 14:24:09 -0500 Skip Montanaro <skip@pobox.com> writes:
>
> >> Does anyone know who might stock the rubber seal where the
> TR6 fuel
> >> cap meets the fill hole?
>
> Are you talking about the seal between the body and the filler pipe?
> I
> bought one of those a couple years ago, probably from TRF or Moss.
> My
> TR-250 has no seal between the cap and the filler pipe, however.
> Just a
> magnet on the inside of the gas cap proper holds it to the filler
> pipe. Did
> this change (perhaps to meet stricter fuel vapor requirements)
> during the
> TR6 run?
>
> --
> Skip Montanaro (skip@pobox.com)
> http://www.mojam.com/
> http://www.musi-cal.com/
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|