>===== Original Message From Shrack04@aol.com =====
>Jim Taylor in Bartlesville Oklahoma did my SU H6's, He did the Vacuum Drop
>Test to make sure they were in spec and matched, checked the Piston Springs
>at various loads and Matched them, replaced all parts, Float Valves, Throttle
>Shafts (with standard size), Precision fittled shaft bushings, (extra width),
>Jets, Needles, Gaskets Seals, Grommets, Pins, Ground out flash metal in
>bores, Polished bores, buffed brass & steel parts, preset, gave a full report
>of conditions, and gave instructions on how to set upon replacement. I sent
>him a really grubby set and they came back like new. He is a Senior Design
>Engineer and Jaguar Service School Graduate. Has done British carbs for many
>many years. It was $150 for the pair,,
Sounds like a good resource. Do you have some contact info on Jim Taylor
Brian Sanborn
62 TR4 CT16260L(O) - Groton, MA
My TR4 Restoration Web Site
http://www.net1plus.com/users/sanborn
E-Mail: sanborn@net1plus.com
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|