My Haynes says to replace the thrust washers if the shaft end play is
outside of .002"-.005". IMO a common cause of excess wear in the dizzy
is failing to add a few drops of oil under the rotor, every 6,000 miles.
Randall
Rick Barnard wrote:
>
> Hello,
> On my distributor shaft, the axial play on the rotor end is about
> .030". Seems like too much. Something's loose inside allowing this
> much play. Is this unusual?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|