triumphs
[Top] [All Lists]

RE: TR Aluminum Brake Drums - PICTURES

To: "mitch" <tristatelining@isoc.net>
Subject: RE: TR Aluminum Brake Drums - PICTURES
From: "Hugh Barber" <tr6nut@telocity.com>
Date: Sun, 12 Aug 2001 20:46:25 -0700
Cc: "Triumphs List" <triumphs@autox.team.net>, "6-Pack List" <6pack@autox.team.net>
Mitch,

I don't sell them - I bought mine retail for $70.00 each plus shipping.  It
is popular to take Datsun 240Z aluminum drums and machine the center bore
and rear "lip" so they can be used on a Triumph.  They work very well and
are lighter than the stock cast iron TR item.  The problem is finding a good
set for a reasonable cost (junk yards are iffy, Nissan wants $90+ each for
new ones) and then you must pay additional $$$ to re-machine them so they
fit a TR.  Autospecialty (a TRW company) has decided to offer the 240Z drum
"pre-machined" for use on a Triumph.  As a point of fact, Autospecialty is
discontinuing the cast iron TR drums and will offer only these replacements.
I have surfed the web and one can buy them for between $70-80 each.  I
offered this info to the lists and subsequently somebody asked if I had a
picture of them.  I took a couple of shots and posted them on my web space.
I have no affiliation with Autospecialty.  I bought a set of the drums and
they fit great.

Hope this helps,

Hugh Barber
Hollister, CA
'73 TR6

-----Original Message-----
From: mitch [mailto:tristatelining@isoc.net]
Sent: Sunday, August 12, 2001 8:27 PM
To: Hugh Barber
Subject: Re: TR Aluminum Brake Drums - PICTURES


what do those cost and how much less do they weigh than the stock ones each?
----- Original Message -----
From: Hugh Barber <tr6nut@telocity.com>
To: Triumphs List <triumphs@autox.team.net>; 6-Pack List
<6pack@autox.team.net>
Sent: Sunday, August 12, 2001 11:21 PM
Subject: TR Aluminum Brake Drums - PICTURES


> Hi Listers,
>
> Some of you have asked if there are any pictures available of the
> Autospecialty aluminum brake drums. I took my "el cheapo" digital camera
out
> to the garage tonight and took a couple of pictures of the drums.  They
can
> be viewed at http://www.vintageprep.com/drum.html
>
> Hope this helps,
>
> Hugh Barber
> Hollister,CA 95023
> '73 TR6 (with aluminum brake drums)

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///


<Prev in Thread] Current Thread [Next in Thread>