Message text written by Douglas Frank
>...the only good idea I've had so far, is to somehow fit a pressure gauge
to a
hydraulic bottle jack.
What sort of pressure gauge reads h.p. oil pressure? Assuming a 2 sq. in.
piston area, to lift 600 lbs would require 300 psi, obviously.
<
Doug, check with an Hydraulics parts supplier in your area. There are
plenty of gauges that are calibrated for the range of 0-2,000 PSI.
Dave
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|