Hi,
describing as a bit hard but the line coming from the front is fixed at the
frame and this end is linked with this flex hose to the T joint. The 2 brake
cylinders are connected to the T joint.
this picture will show you the location www.triumphtr.de/images/ch06.jpg
Hope this helps
Bernd
----- Original Message -----
From: <clarkja34@netscape.net>
To: <triumphs@autox.team.net>
Cc: <clarkja34@netscape.net>
Sent: Wednesday, April 18, 2001 11:17 AM
Subject: TR4A live axle
>
> can anyone confirm the connection of the rear brake flex hose. the manual
only shows the connections for the irs version. should there be a T joint as
is shown for the TR4 with the old style frame. Does one end of the flex hose
fasten directly to the wheel cylinder via the bleed nipple as it is the only
connection left available after running the brake line from one rear wheel
cylinder to the other.
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|