Message text written by "STEVE ROHAL"
>Thanks for your help with my heater switch question. Now I have a question
about tail turn signals. One side works fine, but the right side will not.
When I remove the wiring to the bulb and move it to an adjacent bulb, such
as
back up light etc., it makes them blink fine, so it seems that the signal
is
getting through. I've checked the ground, socket, etc.and all seem fine.
Any
idea why I can't get the light to work?
Your help is appreciated!
<
Well, assuming the bulb is good, it has to be the bulb socket. Check for
corrosion in the socket itself (where the bulb makes contact), check the
fingers that make the ground connection to the lamp assembly and check the
tab where the wire hooks up.
Or just buy another socket.
Dave
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|