Alternator update:
I managed to go in the garage on Sunday while "the boss" went to church. I am
not allowed to do anything for the next five days, found out on Friday
afternoon I have a pretty good case of Pneumonia...Ok, enough me.
I removed and replace the alternator, had to go to Home Depot (stealth and
fast) to buy a longer bolt for the holding bracket (5/16 x 5.5 inches).
While trying to reattached the belt I got kind of excited thinking it was going
to be a straight up match, but the fan behind the pulley (Bosch) is larger than
the Lucas one, so it would hit the top holding bracket. I tried to remove the
belt so I could go buy a longer one, but as I was studying my plan of attack
the dogs started barking. "The boss" was coming back so I flew in the house and
started moaning and coughing.
New question what is the trick to removing the belt.
Cough, Cough
Jorge
PS Dick the pulleys are almost identical in size, the only difference is in the
fan size.
>
> You can reuse the Triumph belt but it is a bit tricky to get it on. You can
> remove the alternator's mounting bolt, pivot the alternator up towards the
> water pump, slide the belt over the alternator pulley, and then replace the
> mounting bolt. You'll still have enough clearance to adjust the belt using
> the original pivot. On my car the replacement (Bosch/Fiesta) alternator
> won't pivot far enough to get the belt over. I've tried sourcing a slightly
> longer belt but both NAPA and Farm & Fleet carry the regular size and one
> that's TOO long. They both list an intermediate size but it's special order.
>
> -Erik
>
>
> --
> Erik Quackenbush, V.P. Operations, Midwest Filter Corporation
> 1-847-680-0566 fax: 1-847-680-0832 http://www.midwestfilter.com
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|