Paul :
I would suggest you ask that question of the folks at Lumenition
http://www.lumenition.com/
First of all, I don't believe Accel makes a "12 volt coil", they only make
what people on this list insist on calling a 6 volt coil (which is a 12 volt
coil that requires an external ballast resistor).
Second, the requirements may actually be different depending on which exact
model of Lumenition you have. For example, the Crane XR700 requires a
ballast when used with an externally ballasted coil, but the Crane XR3000
(which looks almost identical, even comes in the same box) does not (and can
only be used with an externally ballasted coil).
Randall
59 TR3A daily driver - Crane XR3000 with Accel coil
Paul J. Burr wrote :
> Since I have a Lumenition elctronic igntion, and a 12
> volt Accel
> coil, do I still need the resistance wire? It would seem to me
> that since I
> no longer have igntion points that need to be protected by running at 6
> volts, I should rig the coil to be 12 volts all the time. Anyone done this
> before?
///
/// triumphs@autox.team.net mailing list
///
|