triumphs
[Top] [All Lists]

Re: Kill switch with Crane ignition

To: triumphs@autox.team.net
Subject: Re: Kill switch with Crane ignition
From: "J.H. Roulleaux" <Jean.Rouleaux@skynet.be>
Date: Sun, 18 Feb 2001 00:58:17 +0100
Hi Phil,
To be on the safe side I did put a DURITE  Battery Isolator Switch
on my TR6 .This sort of switches are obligatory in competition and 
were recommended by Lumenition for my engine management 
system.
Quote from Durite"
Switch with ignition kill and alternator load dump resistor
The switch is designed to prevent damage to the alternator and 
electrical systems when isolating the battery.It isolates the main 
power feed ( + ) from the battery to the electric system as well as 
interrupting the independent ignition feed,thus preventing engine run-
on whilst connecting the electrical and alternator systems to earth 
through a resistor to suppress any alternator surge-spikes from 
damaging any part of the system.
Unquote"
Works great and makes the car more or less theft proof when you 
remove the key.
Jean      

///
///  triumphs@autox.team.net mailing list
///


<Prev in Thread] Current Thread [Next in Thread>