Hi All. I will get to the point first so if your not interested in reading
extra you don't have to.
I desperatly need a pic of a dead on SIDE view of the TR3 front apron (nose)
preferably, with out the bumper. I hope this is not to much to ask those of
you that have a digital camera and a front apron with out bumper. I need to
concentrate on the angle of the apron that is between the end of the grill
and the flange that bolts to the front fender and the bulge below that angle
On one side I have a fair slope, and the other side if alot more vertical.
So a few shots in this area would really help me out.
Thank you.
Pat
PS: Okay for those of you that have been following my saga... I have cut out
the left 1/3 of a donor nose and the entire lower valance and did the same
to my "good" nose. They seemed to have mated well with only 3/64" gap where
the cutting disk was. I made a fantastic jig to hold my nose solid while
working on it. Once I have finished with it I will offer to anyone on the
list who may be able to make use of it. I also cut our a wood brace that
bolts on to each head light pot to ensure a good line up. Interested ? I
have some pics .
|