Doesn't the Ignitor require the use of an externally ballasted coil ?
In other words, it may not be compatible with your Lucas Sports coil.
Make sure the reluctor gap is set properly and there is no excess side
movement of the shaft. (Just like points, the dwell and timing of the
Ignitor is affected by the gap, although to a lesser degree.) Also, you
need to reset the timing after installation.
Randall
Tr6pjw@aol.com wrote:
>
> i have a 74 tr6 with a lucas sports coil and after reading some web pages
> concerning the ignitor thought i would install on my tr. instalation seems
> to be pretty straitforward but my car now runs Rough. has any body had
> success with this on a 74 with the lucas 22d? any help much appreciated.
> Paul Wilson. ballast resistor was unhooked when the sport coil was
> installed.
|