John :
Some people have found that just jacking the engine up a little against the
mounts (without loosening them) gives enough clearance.
Another thing that helps is to get a thinner fan belt. Cummins 178539WRZ or
NAPA 25-24379 (Thanks Fred !).
Randall
On Friday, October 06, 2000 10:30 AM, John Cowan [SMTP:jfcowan@pacbell.net]
wrote:
>
> I'm trying to replace the fan belt on my '66 solid axle TR-4A after
> replacing the timing chain. The space between the steering rack tube and
> the hub extension above seems way too narrow to get the belt through.
|