Hi Joe
Ok I'll ask, why the George bush method?
Graham.
----- Original Message -----
From: "Joe Curry" <spitlist@gte.net>
To: "Pat" <pleask@mailhost.wlc.com>
Cc: "TRlist" <triumphs@autox.team.net>
Sent: Sunday, August 13, 2000 3:20 PM
Subject: Re: Pin holes in floor pans
>
> Pat,
> If you have a brazing torch and some patience, you can use the George
> Bush method of repairing the pinholes.
>
> Here's how it works:
>
> Jack the car up so that you can put a high intensity lamp under the
> floor. Turn off the garage light and you will have the 1000 points of
> light to guide your repairs. If the holes are really small, you can
> just fill them with a little brass rod. Larger holes may require a
> little metal patch brazed over it.
>
> You will know that you are finished when you have extinguished all
> thousand of the points of light.
>
> Regards,
> Joe
>
> Pat wrote:
> >
> > I have some pin holes in the floor pans of my Project TR3. The PDO put
in
> > "new" pans years back but did not use the factory ones.
> >
> > He did a good enough job that I just can not bring myself to fully
remove
> > them nor do I have the money to do so.
> >
> > Any idea's what I can smear over the pans to seal them up ?
> >
> > Thanks,Pat
|