I have an ADDCO sway bar for the front of a TR3 and two mounting kits.
One is a front kit & one is a rear kit (Unlabeled of course)
I'm ready to mount the front bar.
There is a metal tab that fits to the top on the lower wish bone. It has
a pair of holes near diagonal oposit corners. The big hole is for
thebuchings & down link. The small hole is for mounting on the side top
of the lower wishbone.
Question#1
With the small hole to the rear, is the top plate oriented so that the
big hole is closser to the outside or inside?
Question #2
I have different downlinks (one for the front & one for the rear.
One is a shorter bolt and the bushings all stack one on top of the other.
One is a longer bolt and has a sleave type spacer that fits between the
upper pair of bushings & the lower pair of bushings.
DOes the front use the longer bolt with the spacer between the bushing
pairs or the short bolt with the bushing pairs against each other?
Wouldn't it be nice if I had just abeled the boxes when I got them and
removed them from the original shipping boxes about 8 years ago?
TeriAnn Wakeman Marigold Ltd.
Santa Cruz, California Web design, site updating, testing
webmaster@overlander.net search engine optimization, graphics
and more
http://www.overlander.net/Marigold/index.html
|