Ross,
You might try a "roll pin". These are available at hardware stores. Failing
that, you could make pin out of a nail or appropriate sized steel rod and lock
it in place with some locktite or epoxy.
Hope this helps,
Hugh Barber
Hollister, CA
'73 TR6
>
>Hi all,
>The pin in the fuel cap hinge broke recently. The parts catalogues I have do
>not show a replacement. Presently I have a nail and electricians tape
>holding it together. It works fine but looks like cr**. Any suggestions on
a
>repair.
>
>Regards
>Ross Maylor
>
>
>
>
|