grommets and plugs

["Evans, Mark" <Mark.Evans@Anheuser-Busch.com>]

Thanks to all who responded to my question regarding installation of grommets
and plugs.

It seems that the use of a lubricant such as WD40 or silicone is the way to go.
Also, if you can reach both sides of the hole, use a string wrapped around the
grommet or plug recess to pull the lip through the other side of the hole. This
would be a miniature version of the rope trick used to install a windscreen.

Thanks again.

Mark A. Evans
1966 TR4A IRS CTC63970 LO
markaevans@mindspring.com