Stag oil cooler

["Cindy and Terry@ESP" <esp@hypermax.net.au>]

The 3/16" or 1/4" inner diameter pipes into the oil cooler are generally
thought to be too small for an engine oil cooler, and therfore provide too
great a restriction on the pump. As Stags are notorious for a low capacity
oil system, I would think you would be better off with a correct,1/2" or
9/16" ID plumbing system, including a thermostatic bypass valve. We have
found the Stag benefits greatly from engine oil coolers in hot climates

Terry O'Beirne
GT6 racer, TR5, 2500 racer etc etc