I had broke off some studs in my exhaust manifold.
I had enough for vice-grips, but they didn't work.
I welded a nut on to the broken stud and it came right out!
By heating the stud and not the manifold in the welding process,
the difference in temp helped break the bond.
Good luck!
Brian
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
E-MAIL ADDRESS: borgstede@umsl.edu
Brian Borgstede I
Telecommunications Engineer, I '68 Triumph
University of Missouri, St. Louis I
Instructional Technology Center I TR-250
Phone: (314) 516-6433 I (or 2 or more)
Fax: (314) 516-5294 I
|