Red, and others wanting to convert.
Suggest you look at the following link. Best article I've seen on the
subject.
http://www.mit.edu:8001/afs/athena.mit.edu/user/z/i/zimerman/www/Documents/t
r6/carbtoPI.html
Check your head for port spacing.....
Hope this helps.
Peter Cebalo
Auckland, New Zealand
-------------------------------
Date: Sat, 10 Jun 2000 06:44:25 -0400
From: "Hansen, Hans C, III (Red), GLSVC" <rhansen@att.com>
Subject: Fuel Injection (PI) for a 1974 TR6
Fellow LisTRs -
I know of a Lucas fuel injection system that's available. It supposedly is
the same unit used on TR5s.
I have a stock '74 TR6 with a pair of Strombergs. What does it take to
convert this car to fuel injection.? The system includes inlet manifolds,
injectors, metering unit, fuel filter, and boot pump. What else would I
need? What changes to my existing set up need I make?
Due to time constraints, I haven't been a continuous and loyal reader of The
List for several months now. So, if this question was posed before, please
forgive my ignorance.
Any and all input would be deeply appreciated!
TIA,
Red Hansen
'74 TR6 CF13994U
'58 TR3A TS41439L
|