Hi Randall,
Never thought about an internal connection! Just popped up and looked at
the road car and it looks like you are right! There's a cover held on by a
number of small screws.
Thanks again,
Tony
At 01:29 PM 5/29/00 -0700, you wrote:
>Tony :
>
>Newer cars probably aren't the same, but on a TR3 you have to remove the
>cover plate from the gearbox, undo a clip for the parking contact and
>lift out the connecting rod, then the cable, housing, and clamp fitting.
>
>Randall
>
>Tony Gordon wrote:
> >
> > Having now got a parts car for the first time - many thanks to Tom Ambrose
> > (shipwrights occurs pretty quickly in this world, doesn't it!), we're
> > having difficulty in getting some needed bits off the old car ... any
> > suggestions on how to remove the drive cable from the wiper motor? The nut
> > undid very easily, and the inner drive cable is well- lubed and looks in
> > good shape but does not wnat to come out of the gearbox at all. I'm a bit
> > nervous about cutting the cable just in case the one on the "road" car
> > doesn't come out either!
> >
> > TIA
> >
> > Tony Gordon
|