Roger :
Unless you have also made some serious mods to the inner fender, I
believe you will find that only the short filters fit.
Moss lists K&Ns for 1.75" SU carbs in both 1.75" (222-955) and 3"
heights (222-960).
APT ( http://www.aptfast.com/ ) lists a variety of filters for H6, in
1.75", 2.5" and 3.25" heights, as well as a cone shaped filter. If you
really want more depth, it should be easy enough to modify their end
plates for a 5" or even 7" K&N element. APT makes their own plates,
only the elements are supplied by K&N.
Randall
Roger Colson wrote:
>
> Hello fellow listers,
>
> It was recommended to upgrade to K&N filters on my TR3. Looking
> over the selection of the big three it seems that only a short filter is
> available. A deep filter would be desired because a ram horn can be
> used.
>
> Checking a K&N catalog shows no filter for any Triumph before 1980.
> Checking further no filter is available for SU-H6. Just HS6 and HIF-6.
>
> Contacting K&N directly produced no further information.
>
> Has anyone installed a K&N filter other than the short ones available
> from the "BIG 3"? If so what was the K&N part number?
>
> Thank you,
> Roger
>
> Roger Colson
> 57 TR3 TS21383L
> sassamon@mediaone.net
> http://people.ne.mediaone.net/sassamon/TS21383L
|