Hi again
For the most part the advice on the choke linkage seems to be to disable the
fast idle cam as it raises the idle way too high, this is the way Mine is
set up, just has enough slack so the cam doesn't do anything. On this basis
you could use the cable for the front carb to do the metering unit and leave
the other end coiled up somewhere!
Graham.
----- Original Message -----
From: <lee.k.janssen@lmco.com>
To: <triumphs@autox.team.net>
Sent: Wednesday, May 10, 2000 4:25 PM
Subject: PI choke cable
>
> Does anyone know if the TR6 twin carb choke cable can be used with a PI
> setup?
> It looks like the cable to the rear carb would be too short to attach to
the
> metering unit.
> Thanks in advance
> Lee Janssen
> Denver CO
>
>
>
|