Hi all,
I'm passing this question along for a friend of mine who is not on the
internet, but has a question about his TR7 project. You can respond to me,
then I'll pass it along to him. His question is below.
Much thanks,
Scott Helms
=====================
An inquiry directed to any wedge owner:
I am freshening up a 1980 TR7 drop-top and in the process, repainting the
bumpers.
As with most wedge TR's, the front bumper has a noticeable sag where it wraps
around the front corner of the car.
Does any one know of a good way to fix this unsightly problem? Also, why did
the factory place a heavy piece of steel at the ends of the front bumpers
(this seems to put a lot of unnecessary strain on the six, rather small
mounting bolts)?
Any comments are appreciated.
Joe Carlson
Elkhart, IN
'52 TR2
'61 TR3A
'63 TR4
'64 Spitfire
'68 TR250
'68 TR250
'68 GT6
'75 TR6
'80 TR7
'80 TR8
|