Subject: | Re: TR6 cam questions |
---|---|
From: | Randall <randallyoung@earthlink.net> |
Date: | Thu, 27 Apr 2000 09:10:11 -0700 |
Cc: | triumphs@autox.team.net |
References: | <392FCD67.A9B9AE8C@bellatlantic.net> |
Keith Ehrlich wrote: ><snip> > a good road timing will wind up with an advance of > close to 23-25 degrees! Keith : That figure is almost certainly for ignition timing (total advance), NOT for cam timing. If the cam timing is moved from 0 at all, it's only by a few degrees, usually less than 5 and certainly less than 20. Randall |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Triumph Parts, N197TR4 |
---|---|
Next by Date: | Re: Dual master cylinder, Randall |
Previous by Thread: | TR6 cam questions, Keith Ehrlich |
Next by Thread: | test * please delete, Lawrence G Miceli |
Indexes: | [Date] [Thread] [Top] [All Lists] |