Nathan :
That sure could do it. Most likely, the flex line has failed
internally, and needs to be replaced. Moss, TRF or any of the usual
suspects should be able to supply a replacement.
Randall
59 TR3A TS39781LO
Nathan Albright wrote:
>
> I recently purchased a 1961 tr4 (ct574) in what I consider restorable
> condition. It seems to run pretty good but it is having some clutch release
> problems. When I have the clutch down and release it in gear it takes 10-15
> seconds to engage. The previous owner said it was probably the slave
> cylinder but I removed the slave and it seems to be working ok after having
> put a kit in it. I removed the flex line that runs from the slave to the
> hard line and it seems to be stopped up. I was wondering if this could be
> what is making the clutch very hard to press in and keeping it from
> releasing properly.
>
> Nathan Albright
> 1961 Tr-4 CT574
|