Message text written by "Philip E. Barnes"
>
You want 18 meg-ohm zero-particle water? Start with city water, run it
through a filter to take out the chunkage, next comes a resin bed for light
mineral removal/ion exchange. Carbon tank to remove chlorine then to a
reverse-osmosis unit to strip out remaining minerals. Now comes the good
stuff; Mixed-bed de-ionizing resin, ultra-violet sterilizer (kills the
bugs), ultra-filter to 0.1 micron and an ozone injector to keep it clean.
Keep the whole mess moving at 10 gal/min. or so through the polishing loop
and you're all set. Let it sit for more than an hour and you get to start
all over.
--Phil
<
Does this mean that if I do use your ultra pure water and shut down the
engine for more than an hour I have to drain and refill?
Dave
P.S. ;-)
|